新聞中心
NEWS CENTER
聯系我們
CONTACTS US
濟南皓暉建材有限公司,總部位于中國泉城——山東濟南,是一家專業生產銷售石塑電梯門套,仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年,憑著優質的產品質量和完善的售后服務,在全國各地都有我們的工程案例。
我們本著“以質量求生存 ,靠管理出效益,憑信譽贏口碑,以實干筑輝煌”的經營理念,公司將立足于當代建材現代化發展前沿,依靠科技、勇于探索,以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。
聯系電話: 15853163650
工廠地址:山東濟南章丘區(歡迎廣大客戶來廠勘察)
行業新聞
COMPANY NEWS
電梯門套廠家分享安裝流程
2018-05-02 14:07:21 文章來源:www.leo918.cn
濟南皓暉建材電梯門套廠家分享電梯門套的安裝步驟,下面就給大家詳細分享。
Jinan hao CDH building materials manufacturer of elevator door cover share the elevator door cover installation steps, the following details to share to everyone.
第一、電梯門套表面需要簡單處理,表面應干燥,含水不大于8%。
Second, the elevator door cover to choose good material before installation.
第三、對安裝的結構表面清理,放水平線、垂直線。
Third, cleaning the surface of the structure of installation, put in vertical and horizontal.
第四、用臺鉆打眼、每塊板上、下打眼,孔位打在板中間,孔徑為 8毫米,深度為12毫米。
Fourth, with bench drill, and punch a hole on every board, the drilling, hole location in the middle of the plate, the aperture is 8 millimeter, depth of 12 mm.
第五、用膨脹螺栓把角架固定,再把掛件固定在角架上。
Sixth, the elevator door cover slot of the fixed with marble glue on the pendant.
第七、立面垂直,光面平整,接縫平直,接縫寬度,偏差允許2毫米。
Seventh, vertical elevation, smooth level off, the seam straight, seam width, 2 mm deviation allowed.
Jinan hao CDH building materials manufacturer of elevator door cover share the elevator door cover installation steps, the following details to share to everyone.
First, the elevator door cover surface need simple processing, surface should be dry, water cut is not greater than 8%.
第二、石電梯門套安裝前先挑選好的材質。Second, the elevator door cover to choose good material before installation.
Third, cleaning the surface of the structure of installation, put in vertical and horizontal.
Fourth, with bench drill, and punch a hole on every board, the drilling, hole location in the middle of the plate, the aperture is 8 millimeter, depth of 12 mm.
Fifth, with the expansion bolt cover the fixed frame, again to hang on the Angle of the rack.
Sixth, the elevator door cover slot of the fixed with marble glue on the pendant.
Seventh, vertical elevation, smooth level off, the seam straight, seam width, 2 mm deviation allowed.
第八、全部安裝完后,要對電梯門套表面一次性清潔干凈。
Eighth, after the installation, all one-time clean to the elevator door cover surface.
上一篇:石塑電梯套線條的優點
下一篇:石塑電梯門套的做法