亚洲av无码专区首页,精品无人区无码乱码毛片国产,欧洲人妻丰满AV无码久久不卡,奇米777四色影视在线看

今天的天氣依然很熱，提醒大家注意防暑。木工在施工現場也是需要注意防暑，同時干活的時候也有需要注意的事項。

電梯門套廠家小編就在此給一些做木工活的師傅分享一些小知識，希望對大家有所幫助。

Today's weather is still very hot, to remind you to pay attention to heatstroke. Carpenters also need to pay attention to the prevention of heat in the construction site. At the same time, there are matters needing attention when working.
The elevator door manufacturer Xiaobian is here to share some small knowledge for some carpenter's living masters, hoping to help you.

1、仔細查看圖紙
1. Look at the drawings carefully
選定木工材料后，業主要依據圖紙對材料進行全面檢查，一定要在簽字前認真的檢查一遍，材料的性能、規格，要知道其中的作用，為接下來的施工做好準備。

After the selection of carpenter material, the industry mainly checks the material according to the drawings. It must be carefully checked before the signature, the performance and specifications of the material, to know the role of the material, and to prepare for the next construction.

2、按照合同驗收

2, in accordance with the acceptance of the contract

木工進場時，業主可根據合同，通知驗收人到當場對木工材料進行檢收，如果檢收合格，驗收人要在驗收單上簽字。

When the carpenter enters the field, the owner may inform the acceptor from the contract to collect the carpenter material on the spot. If the inspection is qualified, the acceptor shall sign the acceptance check.

假如業主自己對材料進行了驗收，那后續的施工倘若有問題，你便會缺乏法律依據，以至于出現一些糾紛，這都是不可取的，全部照著程度辦事，暫時麻煩一點，為后面的工作提供了保障的基礎。

If the owner's own acceptance of the material, then if there are problems in the follow-up construction, you will lack legal basis, so that there are some disputes, this is not advisable, all in the degree of business, temporarily trouble a little, for the back of the work to provide a guarantee basis.

3、根據規定驗收
3. Acceptance according to the regulations

先看木工材料的商標、生產地、出廠檢驗報告及其他相關證明；然后是對外觀進行排查，看看是否起翹、色差、變形、破損、斷裂及其他缺陷；還要看材料其內部的結構，是否均勻，是否空心現象、是否是不合適的產品。

First look at the trademarks of woodworking materials, production sites, factory inspection reports and other relevant certificates, and then look up the appearance of the material, to see if the warpage, color difference, deformation, breakage, fracture and other defects are raised; it also depends on the structure of the material, whether it is homogeneous, whether it is hollow, or whether it is an inappropriate product.

4、根據材質存貯

4, according to material storage

木工材料進場以后，材料不能亂放，因木材有其特殊性，怕潮、怕曬、怕高溫。禁止放在太陽直射處、陰暗潮濕處、高溫封閉處，不然木材的含水率發生變化，還容易使板材變形，或者產生裂紋，造成不必要的損失。
After entering the woodworking material, materials can not be misplaced, because the wood has its particularity, for fear of tide, sun drying and high temperature. It is forbidden to put in the direct of the sun, the dark wet place, the high temperature closed place, otherwise the moisture content of the wood will change, it can also easily make the sheet deformation, or produce the crack, causing unnecessary loss.

電梯門套廠家小編溫馨提示：無論在什么情況下，一定要按照你的合同上進行各項檢查，不然以后出了問題，自己都不知道怎么辦，那就麻煩了。

Elevator door manufacturer small editor warm hint: no matter in any case, must be in accordance with your contract for all the inspection, otherwise the problem later, I do not know how to do, that is troublesome.