亚洲av无码专区首页,精品无人区无码乱码毛片国产,欧洲人妻丰满AV无码久久不卡,奇米777四色影视在线看

全國服務熱線:

15853163650
您當前的位置:首頁 > 新聞動態 > 行業新聞
    聯系我們

    CONTACTS US

    濟南皓暉建材有限公司,總部位于中國泉城——山東濟南,是一家專業生產銷售石塑電梯門套,仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年,憑著優質的產品質量和完善的售后服務,在全國各地都有我們的工程案例。

    我們本著“以質量求生存 ,靠管理出效益,憑信譽贏口碑,以實干筑輝煌”的經營理念,公司將立足于當代建材現代化發展前沿,依靠科技、勇于探索,以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。

    聯系電話: 15853163650

    工廠地址:山東濟南章丘區(歡迎廣大客戶來廠勘察)

行業新聞

COMPANY NEWS

仿大理石裝飾板安裝步驟

2016-05-06 16:57:14 文章來源:www.leo918.cn

第一步:對墻面進行平整預處理,中間要用到,尺子、切割機、錘子、釘子。
The first step: the surface of the smooth pretreatment, in the middle to use, ruler, cutting machine, hammer, nails.
注意點:墻面要做到平整,有坑洼的地方使用發泡膠填充,或者直接打上木架。
Note: the wall to achieve smooth, eliminate the use of styrofoam filled, or a direct hit on the gallows.
第二步:根據實際尺寸進行仿大理石裝飾板的切割。
The second step: according to the actual size of the imitation marble decorative plate cutting.
注意點:在拼接的過程當中要從一邊開始,不限制那邊,邊緣根絕實際尺寸裁剪。

仿大理石uv板
Note: in the splicing process should start from the side, does not limit the side edge according to the actual size of cutting.
第三步:將拼接好的板材取下,然后用結構膠進行涂抹。兩種涂抹方式1.全部均勻的整板涂抹。2.定點涂抹。
The third step: the splicing of a good plate removed, and then use the structural adhesive for painting. Two all the way to apply 1 evenly coated. 2 fixed point smear.
注意點:在涂抹的時候盡量均勻,避免不平整的結合!
Note: in the smear of the time as far as possible to avoid uneven combination!
第四步:邊緣和仿大理石線條搭配使用,能夠使設計的整體效果更加完美!
The fourth step: the edge and the imitation marble line with use, can make the design of the overall effect is more perfect!
注意點:不能畫蛇添足,根據場合進行使用。
Note: can not use superfluous, according to the occasion.
第五步:修邊機的使用。這個過程看的就是師傅技術了,有一些年輕沒經驗的師傅修邊做的非常糟糕,影響整體的效果。
The fifth step: the use of trimming machine. This process is to see the master of technology, there are some young and inexperienced master to repair the edge of the very bad, affecting the overall effect.
注意點:盡量找個有經驗的師傅去做這個工作。修邊會做到錦上添花的效果。
Note: try to find an experienced teacher to do the work. Trimming can achieve the effect of icing on the cake.
第六步:最后撕去仿大理石UV裝飾板材飾面的防護膜。
The sixth step: the last to tear off the imitation marble UV decorative plate facing the protective film.
注意點:不要用利器去除去封膜,慢慢的用手揭開封膜。
Note: do not use the weapon to remove the film, slowly open the sealing film.