亚洲av无码专区首页,精品无人区无码乱码毛片国产,欧洲人妻丰满AV无码久久不卡,奇米777四色影视在线看

首先，在墻面上覆上一面基層，常用的是3MM的三合板，木工板，好點是防火玻鎂板。用氣釘把它們釘在墻面上，并用沙紙將板面清潔干凈。鋸板，將UV高光裝飾板按實際要求鋸成一塊塊的。倒邊，將要安裝的UV板四邊用倒邊機倒成45度角。根據實際安裝要求，有的只需倒上下兩邊或是三個邊。

First of all, the wall is covered with a basic level, is commonly used in the three 3MM plywood, wood panels, a good point is the fire glass magnesium board. Gas nail nail them on the wall, and the clean surface with sandpaper. Board cutting, UV high light decorative plate according to the actual requirements of sawn pieces. Upside down, the UV board will be installed on the side with the inverted edge down to 45 degrees. According to the actual installation requirements, and some only need to fall on either side or three sides.

其次，清潔仿大理石UV板背面，用沙紙和抹布將UV板背面清潔干凈。把萬能膠或木工膠均勻涂在UV板背面，然后將UV板平整地貼在墻面上，再用手輕輕錘打UV板，讓UV板更加牢固粘在墻面上。調水性填縫料，然后將填縫料填在兩張UV板45度角相交處，先填滿，再用木板垂直角從45度角相交處輕輕劃過，這樣相交處就美觀了。
Secondly, on the back of the clean UV imitation marble board, with sandpaper and cloth to clean the back plate UV. The carpentry or all-purpose adhesive glue evenly coated on the UV plate on the back, and the UV plate is flat and affixed to the wall, and then gently hammering UV board, UV board more firmly glued to the wall. Water diversion of filler and filler filled in two UV board at a 45 degree angle intersection to fill, reoccupy board vertical angle from the 45 degree angle intersect at gently across. This intersection appearance on the.
最后，清潔仿大理石UV板表面，將多余的填縫料清潔干凈。
Finally, clean the surface of imitation marble UV plate, the excess sealant clean.
本文來自：仿大理石uv板更多的精彩內容請點擊我們的官方網站： http://www.leo918.cn我們將竭盡全力為您解決，歡迎咨詢。
This article from: imitation marble UV board more wonderful content please click on our official website: http://www.leo918.cn we will try our best to solve for you, welcome to consult.