新聞中心
NEWS CENTER
聯系我們
CONTACTS US
濟南皓暉建材有限公司，總部位于中國泉城——山東濟南，是一家專業生產銷售石塑電梯門套，仿大理石電梯門套的專業廠家。皓暉建材在電梯門套生產行業很多年，憑著優質的產品質量和完善的售后服務，在全國各地都有我們的工程案例。
我們本著“以質量求生存 ，靠管理出效益，憑信譽贏口碑,以實干筑輝煌”的經營理念，公司將立足于當代建材現代化發展前沿，依靠科技、勇于探索，以優質產品優良服務、信譽與廣大用戶攜手共創輝煌。
聯系電話： 15853163650
工廠地址：山東濟南章丘區（歡迎廣大客戶來廠勘察）
公司動態
COMPANY NEWS
清潔石塑UV板表面的流程有哪些？
2016-04-14 15:18:27 文章來源：www.leo918.cn
1用漏斗將噴霧瓶裝滿蒸餾水。
1 use the funnel to fill the spray bottle with distilled water.
2蒸餾水輕輕噴灑在石塑UV板表面。
2 distilled water is lightly sprayed on the surface of the stone plastic UV board.
3上一層厚厚的太白粉到石塑UV板表面。
3 on a thick layer of white powder into the stone plastic UV board surface.
5一塊干凈的軟布擦去太白粉掃進一個垃圾袋。
5 a clean, soft cloth to wipe off the white powder into a garbage bag.
6果污漬仍殘留在石塑UV板表面，請重復步驟2到5。
6 fruit stains still remain in the stone plastic UV plate surface, please repeat steps 2 to 5.
71茶匙的溫和的洗碗肥皂和溫水在一個小碗里混合。
71 teaspoon mild dishwashing soap and warm water in a small bowl mix.
8一塊軟布浸在肥皂溫水里。擰出多余的水分。
8 a soft cloth dipped in warm soapy water. Screw out the excess water.
9用濕布擦拭石塑UV板表面，徹底清除去太白粉和油脂殘留。
9 use wet cloth to wipe the stone plastic surface of the UV board, to completely remove the cornstarch and oil residue.
10布將石塑UV板表面擦干。
10 cloth will be stone plastic UV board surface dry.
本文由仿大理石線條提供幫助，更多的相關內容請點擊：http://www.leo918.cn我們將詳情為您解答.歡迎您的光臨!
This article from the imitation marble lines to provide help, more relevant content please click: http://www.leo918.cn we will be the details for you to answer!
1 use the funnel to fill the spray bottle with distilled water.
2蒸餾水輕輕噴灑在石塑UV板表面。
2 distilled water is lightly sprayed on the surface of the stone plastic UV board.
3上一層厚厚的太白粉到石塑UV板表面。
3 on a thick layer of white powder into the stone plastic UV board surface.
4太白粉停留24個小時。
5一塊干凈的軟布擦去太白粉掃進一個垃圾袋。
5 a clean, soft cloth to wipe off the white powder into a garbage bag.
6果污漬仍殘留在石塑UV板表面，請重復步驟2到5。
6 fruit stains still remain in the stone plastic UV plate surface, please repeat steps 2 to 5.
71茶匙的溫和的洗碗肥皂和溫水在一個小碗里混合。
71 teaspoon mild dishwashing soap and warm water in a small bowl mix.
8一塊軟布浸在肥皂溫水里。擰出多余的水分。
8 a soft cloth dipped in warm soapy water. Screw out the excess water.
9用濕布擦拭石塑UV板表面，徹底清除去太白粉和油脂殘留。
9 use wet cloth to wipe the stone plastic surface of the UV board, to completely remove the cornstarch and oil residue.
10布將石塑UV板表面擦干。
10 cloth will be stone plastic UV board surface dry.
本文由仿大理石線條提供幫助，更多的相關內容請點擊：http://www.leo918.cn我們將詳情為您解答.歡迎您的光臨!
This article from the imitation marble lines to provide help, more relevant content please click: http://www.leo918.cn we will be the details for you to answer!
上一篇：電梯門套線白華預防的方式
下一篇：仿大理石uv板的未來發展
